Use dpkg to install the Debian package,as follows:. The installer will also try to build kernel modules suitable for the current running kernel. If the build process is not successful you will be shown a warning and the package will be left unconfigured.
You may have to install the appropriate Linux kernel headers, see Section 2. After correcting any problems, run the following command:. If a suitable kernel module was found in the package or the module was successfully built, the installation script will attempt to load that module. If this fails, please see Section Once Oracle VM VirtualBox has been successfully installed and configured, you can start it by clicking VirtualBox in your Start menu or from the command line.
Creates a new system group called vboxusers. The installer must be executed as root with either install or uninstall as the first parameter. Or if you do not have the sudo command available, run the following as root instead:.
Either use the OS user management tools or run the following command as root:. The usermod command of some older Linux distributions does not support the -a option, which adds the user to the given group without affecting membership of other groups.
In this case, find out the current group memberships with the groups command and add all these groups in a comma-separated list to the command line after the -G option. For example: usermod -G group1 , group2 ,vboxusers username. If you cannot use the shell script installer described in Section 2. Run the installer as follows:.
This will unpack all the files needed for installation in the directory install under the current directory. To build the module, change to the directory and use the following command:. If everything builds correctly, run the following command to install the module to the appropriate module directory:. In case you do not have sudo, switch the user account to root and run the following command:.
The above make command will tell you how to create the device node, depending on your Linux system. On certain Linux distributions, you might experience difficulties building the module.
You will have to analyze the error messages from the build system to diagnose the cause of the problems. In general, make sure that the correct Linux kernel sources are used for the build process. Next, you install the system initialization script for the kernel module and activate the initialization script using the right method for your distribution, as follows:. The Debian packages will request some user feedback when installed for the first time.
The debconf system is used to perform this task. To prevent any user interaction during installation, default values can be defined. A file vboxconf can contain the following debconf settings:. The first line enables compilation of the vboxdrv kernel module if no module was found for the current kernel.
The second line enables the package to delete any old vboxdrv kernel modules compiled by previous installations. These default settings can be applied prior to the installation of the Oracle VM VirtualBox Debian package, as follows:. In addition there are some common configuration options that can be set prior to the installation. The RPM format does not provide a configuration system comparable to the debconf system. To configure the installation process for. The automatic generation of the udev rule can be prevented with the following setting:.
If the following line is specified, the package installer will not try to build the vboxdrv kernel module if no module fitting the current kernel was found. The Linux installers create the system user group vboxusers during installation. A user can be made a member of the group vboxusers either by using the desktop user and group tools, or with the following command:. These are symbolic links to VBox. The following detailed instructions should only be of interest if you wish to execute Oracle VM VirtualBox without installing it first.
You should start by compiling the vboxdrv kernel module and inserting it into the Linux kernel. The daemon is automatically started if necessary. There can be multiple daemon instances under different user accounts and applications can only communicate with the daemon running under the user account as the application. The local domain socket resides in a subdirectory of your system's directory for temporary files called.
In case of communication problems or server startup problems, you may try to remove this directory. For the specific versions of Oracle Solaris that are supported as host operating systems, see Section 1. If you have a previously installed instance of Oracle VM VirtualBox on your Oracle Solaris host, please uninstall it first before installing a new instance.
The installation must be performed as root and from the global zone. This is because the Oracle VM VirtualBox installer loads kernel drivers, which cannot be done from non-global zones. To verify which zone you are currently in, execute the zonename command. The installer will then prompt you to enter the package you wish to install. Choose 1 or all and proceed. Next the installer will ask you if you want to allow the postinstall script to be executed.
Choose y and proceed, as it is essential to execute this script which installs the Oracle VM VirtualBox kernel module. Following this confirmation the installer will install Oracle VM VirtualBox and execute the postinstall setup script. Once the postinstall script has been executed your installation is now complete. You may now safely delete the uncompressed package and autoresponse files from your system. A user can be made a member of this group either by using the desktop user and group tools or by running the following command as root:.
Note that adding an active user to the vboxuser group will require the user to log out and then log in again. This should be done manually after successful installation of the package. Using the links provided is easier as you do not have to enter the full path. To perform the uninstallation, start a root terminal session and run the following command:.
To perform a non-interactive installation of Oracle VM VirtualBox there is a response file named autoresponse. The installer uses this for responses to inputs, rather than prompting the user.
Extract the tar. Then open a root terminal session and run the following command:. To perform a non-interactive uninstallation, open a root terminal session and run the following command:. This is done by performing the following steps.
Start a root terminal and run the following command:. Use zonecfg to add the device resource and match properties to the zone, as follows:. This is specified below using the dir attribute and the special attribute. Reboot the zone using zoneadm and you should be able to run Oracle VM VirtualBox from within the configured zone. You have considerable latitude when deciding what virtual hardware to provide to the guest. Use virtual hardware to communicate with the host system or with other guests.
For example, you can use virtual hardware in the following ways:. Provide a guest system access to the physical network through its virtual network card. Provide the host system, other guests, and computers on the Internet access to the guest system. Because Oracle VM VirtualBox is designed to provide a generic virtualization environment for x86 systems, it can run guest operating systems OSes of any kind.
Platforms With Full Support. See Table 3. Platforms With Limited Support. Therefore, resolution of customer issues is not guaranteed. Note that this feature is experimental and thus unsupported. Oracle VM VirtualBox is the first product to provide the modern PC architecture expected by OS X without requiring any of the modifications used by competing virtualization solutions.
For example, some competing solutions perform modifications to the Mac OS X install DVDs, such as a different boot loader and replaced files.
Be aware of the following important issues before you attempt to install a Mac OS X guest:. Mac OS X is commercial, licensed software and contains both license and technical restrictions that limit its use to certain hardware and usage scenarios.
You must understand and comply with these restrictions. These license restrictions are also enforced on a technical level. Mac OS X verifies that it is running on Apple hardware. Most DVDs that accompany Apple hardware check for the exact model. Only CPUs that are known and tested by Apple are supported.
The Mac OS X installer expects the hard disk to be partitioned. So, the installer will not offer a partition selection to you. Before you can install the software successfully, start the Disk Utility from the Tools menu and partition the hard disk.
Close the Disk Utility and proceed with the installation. See Chapter 14, Known Limitations. This is especially true for bit Windows VMs. You only need to provide the installation medium and a few other parameters, such as the name of the default user. Create a new VM. Use one of the following methods:. The VirtualBox Manager, see Section 1. The VBoxManage createvm command, see Section 8. The following sections in this chapter describe how to change the settings for a VM.
Prepare the VM for unattended guest installation. Use the VBoxManage unattended command, see Section 8. Start the VM. When you start the VM, the unattended installation is performed automatically. The installation operation changes the boot device order to boot the virtual hard disk first and then the virtual DVD drive.
If the virtual hard disk is empty prior to the automatic installation, the VM boots from the virtual DVD drive and begins the installation. If the virtual hard disk contains a bootable OS, the installation operation exits. Section 3. The following example shows how to perform an unattended guest installation for an Oracle Linux VM. Create a SATA storage controller and attach the virtual hard disk. Specifies a login name, full name, and login password for a default user on the guest OS.
Note that the specified password is also used for the root user account on the guest. Oracle VM VirtualBox virtualizes nearly all hardware of the host. Depending on a VM's configuration, the guest will see the following virtual hardware:.
Input devices. These devices are supported by most guest OSes. Oracle VM VirtualBox emulates the most common types of hard disk controllers. Whereas supporting only one of these controllers would be enough for Oracle VM VirtualBox by itself, this multitude of storage adapters is required for compatibility with other hypervisors. Windows is very selective about its boot devices, and migrating VMs between hypervisors is very difficult or impossible if the storage controllers are different.
Note that for some legacy Windows guests, third party drivers must be installed for xHCI support. The emulated USB controllers do not communicate directly with devices on the host. In the Settings window, under General , you can configure the most fundamental aspects of the virtual machine such as memory and essential hardware.
The following tabs are available. In the Basic tab of the General settings category, you can find these settings:. As a result, you can only use characters which are allowed for file names on your host OS.
You can display these using the VBoxManage commands. This is the same setting that is specified in the New Virtual Machine wizard. Whereas the default settings of a newly created VM depend on the selected OS type, changing the type later has no effect on VM settings. This value is purely informational and decorative. The following settings are available in the Advanced tab:. See Section With this setting, you can specify any other folder for each VM. Shared Clipboard: You can select here whether the clipboard of the guest OS should be shared with that of your host.
If you select Bidirectional , then Oracle VM VirtualBox will always make sure that both clipboards contain the same data. In such a case, this setting has no effect. For security reasons, the shared clipboard is disabled by default. This setting can be changed at any time using the Shared Clipboard menu item in the Devices menu of the virtual machine. Drag and Drop: This setting enables support for drag and drop.
Select an object, such as a file, from the host or guest and directly copy or open it on the guest or host. Multiple drag and drop modes for a VM enable restricting of access in either direction. For drag and drop to work the Guest Additions need to be installed on the guest. Drag and drop is disabled by default. This setting can be changed at any time using the Drag and Drop menu item in the Devices menu of the virtual machine. On the Description tab you can enter a description for your virtual machine.
This has no effect on the functionality of the machine, but you may find this space useful to note down things such as the configuration of a virtual machine and the software that has been installed into it. The Disk Encryption tab enables you to encrypt disks that are attached to the virtual machine. To enable disk encryption, select the Enable Disk Encryption check box.
Settings are available to configure the cipher used for encryption and the encryption password. All files related to the virtual machine except disk images are stored unencrypted. The System category groups various settings that are related to the basic hardware that is presented to the virtual machine.
As the activation mechanism of Microsoft Windows is sensitive to hardware changes, if you are changing hardware settings for a Windows guest, some of these changes may trigger a request for another activation with Microsoft.
On the Motherboard tab, you can configure virtual hardware that would normally be on the motherboard of a real computer. The specified amount of memory will be requested from the host OS, so it must be available or made available as free memory on the host when attempting to start the VM and will not be available to the host while the VM is running.
This is the same setting that was specified in the New Virtual Machine wizard, as described in Section 1. Generally, it is possible to change the memory size after installing the guest OS. But you must not reduce the memory to an amount where the OS would no longer boot.
Boot Order: Determines the order in which the guest OS will attempt to boot from the various virtual boot devices. This needs to be configured in detail on the command line. Chipset: You can select which chipset will be presented to the virtual machine. PIIX3 is the default chipset for most guests.
Using the ICH9 chipset it is also possible to configure up to 36 network cards, compared to a maximum of eight network adapters with PIIX3. Using the virtual USB tablet has the advantage that movements are reported in absolute coordinates, instead of as relative position changes. This enables Oracle VM VirtualBox to translate mouse events over the VM window into tablet events without having to "capture" the mouse in the guest as described in Section 1.
This makes using the VM less tedious even if Guest Additions are not installed. It is also required if you want to use more than one virtual CPU in a virtual machine. Turning it on after installation will have no effect however. ACPI is the current industry standard to allow OSes to recognize hardware, configure motherboards and other devices and manage power.
ACPI can only be turned off using the command line. However, turning it on after installation will have no effect. On the Processor tab, you can configure settings for the CPU used by the virtual machine. You should not configure virtual machines to use more CPU cores than are available physically. This includes real cores, with no hyperthreads. Note that limiting the execution time of the virtual CPUs may cause guest timing problems.
A warning is displayed at the bottom of the Processor tab if an Execution Cap setting is made that may affect system performance. This is made possible by adding another 4 bits to memory addresses, so that with 36 bits, up to 64 GB can be addressed. For details, see Section 9.
Paravirtualization Interface: Oracle VM VirtualBox provides paravirtualization interfaces to improve time-keeping accuracy and performance of guest OSes. The options available are documented under the --paravirtprovider option in Section 8. For further details on the paravirtualization providers, see Section Hardware Virtualization: You can configure hardware virtualization features for each virtual machine. For technical details, see Section Advanced users may be interested in technical details about hardware virtualization.
In most cases, the default settings on the Acceleration tab will work well. Oracle VM VirtualBox selects sensible defaults, depending on the OS that you selected when you created the virtual machine.
In certain situations, however, you may want to change the preconfigured defaults. Video Memory: Sets the size of the memory provided by the virtual graphics card available to the guest, in MB.
As with the main memory, the specified amount will be allocated from the host's resident memory. Based on the amount of video memory, higher resolutions and color depths may be available. The GUI will show a warning if the amount of video memory is too small to be able to switch the VM into full screen mode.
The minimum value depends on the number of virtual monitors, the screen resolution and the color depth of the host display as well as on the use of 3D acceleration and 2D video acceleration.
Extra memory may be required if display acceleration is used. Up to eight such virtual monitors are supported. The output of the multiple monitors are displayed on the host in multiple VM windows which are running side by side. However, in full screen and seamless mode, they use the available physical monitors attached to the host. As a result, for full screen and seamless modes to work with multiple monitors, you will need at least as many physical monitors as you have virtual monitors configured, or Oracle VM VirtualBox will report an error.
Scale Factor: Enables scaling of the display size. For multiple monitor displays, you can set the scale factor for individual monitors, or globally for all of the monitors.
You can set a default scale factor for all VMs. Use the Display tab in the Global Settings dialogs.
Graphics Controller: Specifies the graphics adapter type used by the guest VM. The following options are available:. This is the default graphics controller for Windows versions before Windows 7 and for Oracle Solaris.
This is the default graphics controller for Linux guests. None: Does not emulate a graphics adapter type. Enable 3D Acceleration: If a virtual machine has Guest Additions installed, you can select here whether the guest should support accelerated 3D graphics.
Enable 2D Video Acceleration: If a virtual machine with Microsoft Windows has Guest Additions installed, you can select here whether the guest should support accelerated 2D video graphics. This enables you to connect to the console of the virtual machine remotely with any standard RDP viewer, such as mstsc.
On Linux and Oracle Solaris systems you can use the standard open source rdesktop program. These features are described in Section 7. Enable Server: Select this check box and configure settings for the remote display connection. On the Recording tab you can enable video and audio recording for a virtual machine and change related settings. Note that these features can be enabled and disabled while a VM is running.
Enable Recording: Select this check box and select a Recording Mode option. Recording Mode: You can choose to record video, audio, or both video and audio. Some settings on the Recording tab may be grayed out, depending on the Recording Mode setting. File Path: The file where the recording is saved. Frame Size: The video resolution of the recorded video, in pixels. The drop-down list enables you to select from common frame sizes. Frames that have a higher frequency are skipped.
Increasing this value reduces the number of skipped frames and increases the file size. Video Quality: Use the slider to set the the bit rate of the video in kilobits per second. Increasing this value improves the appearance of the video at the cost of an increased file size. Audio Quality: Use the slider to set the quality of the audio recording. Increasing this value improves the audio quality at the cost of an increased file size.
Screens: For a multiple monitor display, you can select which screens to record video from. As you adjust the video and audio recording settings, the approximate output file size for a five minute video is shown. In a real computer, so-called storage controllers connect physical disk drives to the rest of the computer. If you have used the Create VM wizard to create a machine, you will normally see something like the following:.
Depending on the guest OS type that you selected when you created the VM, a new VM includes the following storage devices:. IDE controller.
SATA controller. This is a modern type of storage controller for higher hard disk data throughput, to which the virtual hard disks are attached. Initially you will normally have one such virtual disk, but as shown in the previous screenshot, you can have more than one.
Each is represented by a disk image file, such as a VDI file in this example. This might also apply if you selected an older OS type when you created the VM. Oracle VM VirtualBox also provides a floppy controller. You cannot add devices other than floppy drives to this controller. You can modify these media attachments freely. For example, if you wish to copy some files from another virtual disk that you created, you can connect that disk as a second hard disk, as in the above screenshot.
You can then either select Optical Drive or Hard Disk. If you clicked on a floppy controller, you can add a floppy drive instead. Alternatively, right-click on the storage controller and select a menu item there. A dialog is displayed, enabling you to select an existing disk image file or to create a new disk image file.
Most commonly, you will select this option when installing an OS from an ISO file that you have obtained from the Internet. For example, most Linux distributions are available in this way. Depending on the type of disk image, you can set the following Attributes for the disk image in the right part of the Storage settings page:.
The device slot of the controller that the virtual disk is connected to. IDE controllers have four slots: primary device 0, primary device 1, secondary device 0, and secondary device 1. Solid-state Drive presents a virtual disk to the guest as a solid-state device. Hot-pluggable presents a virtual disk to the guest as a hot-pluggable device.
This means that the virtual optical disk is not removed from when the guest system ejects it. To remove an attachment , either select it and click on the Remove icon at the bottom, or right-click on it and select the menu item. Since the Settings dialog is not available at that time, you can also access these settings from the Devices menu of your virtual machine window. The Audio section in a virtual machine's Settings window determines whether the VM will detect a connected sound card, and if the audio output should be played on the host system.
To enable audio for a guest, select the Enable Audio check box. The following settings are available:. On newer Linux distributions, the PulseAudio subsystem is preferred. The Network section in a virtual machine's Settings window enables you to configure how Oracle VM VirtualBox presents virtual network cards to your VM, and how they operate. This way the guest can connect to the outside world using the host's networking and the outside world can connect to services on the guest which you choose to make visible outside of the virtual machine.
It supports many virtual network cards per virtual machine. The first four virtual network cards can be configured in detail in the VirtualBox Manager window. Additional network cards can be configured using the VBoxManage command. Many networking options are available. See Chapter 6, Virtual Networking for more information. Serial ports were commonly used with modems, and some computer mice used to be connected to serial ports before USB became commonplace.
While serial ports are no longer as common as they used to be, there are still some important uses left for them. For example, serial ports can be used to set up a primitive network over a null-modem cable, in case Ethernet is not available. Also, serial ports are indispensable for system programmers needing to do kernel debugging, since kernel debugging software usually interacts with developers over a serial port.
With virtual serial ports, system programmers can do kernel debugging on a virtual machine instead of needing a real computer to connect to. Both receiving and transmitting data is supported.
How this virtual serial port is then connected to the host is configurable, and the details depend on your host OS. You can use either the Settings tabs or the VBoxManage command to set up virtual serial ports. For the latter, see Section 8. You can configure up to four virtual serial ports per virtual machine. For each device, you must set the following:. Port Number: This determines the serial port that the virtual machine should see.
For best results, use the traditional values as follows:. You can also configure a user-defined serial port. Port Mode: What the virtual port is connected to. For each virtual serial port, you have the following options:. Disconnected: The guest will see the device, but it will behave as if no cable had been connected to it. Host Device: Connects the virtual serial port to a physical serial port on your host.
On a Windows host, this will be a name like COM1. Oracle VM VirtualBox will then simply redirect all data received from and sent to the virtual serial port to the physical device. This depends on your host OS, as follows:. On a Windows host, data will be sent and received through a named pipe. The socket filename must be chosen such that the user running Oracle VM VirtualBox has sufficient privileges to create and write to it.
On Linux there are various tools which can connect to a local domain socket or create one in server mode. The most flexible tool is socat and is available as part of many distributions.
In this case, you can configure whether Oracle VM VirtualBox should create the named pipe, or the local domain socket non-Windows hosts, itself or whether Oracle VM VirtualBox should assume that the pipe or socket exists already. With the VBoxManage command-line options, this is referred to as server mode or client mode, respectively. For a direct connection between two virtual machines, corresponding to a null-modem cable, simply configure one VM to create a pipe or socket and another to attach to it.
Raw File: Send the virtual serial port output to a file. This option is very useful for capturing diagnostic output from a guest. Any file may be used for this purpose, as long as the user running Oracle VM VirtualBox has sufficient privileges to create and write to the file. This option enables a remote machine to directly connect to the guest's serial port using TCP. This is typically 23 or Note that on UNIX-like systems you will have to use a port a number greater than for regular users.
Up to four serial ports can be configured per virtual machine, but you can pick any port numbers out of the above. However, serial ports cannot reliably share interrupts. As soon as the guest system starts using a USB device, it will appear as unavailable on the host.
Be careful with USB devices that are currently in use on the host. For example, if you allow your guest to connect to your USB hard disk that is currently mounted on the host, when the guest is activated, it will be disconnected from the host without a proper shutdown. This may cause data loss. Oracle Solaris hosts have a few known limitations regarding USB support. For this, you can create filters by specifying certain properties of the USB device. USB devices with a matching filter will be automatically passed to the guest once they are attached to the host.
USB devices without a matching filter can be passed manually to the guest, for example by using the Devices , USB menu. You can give the filter a name, for later reference, and specify the filter criteria. The more criteria you specify, the more precisely devices will be selected.
For instance, if you specify only a vendor ID of d, all devices produced by Logitech will be available to the guest. If you fill in all fields, on the other hand, the filter will only apply to a particular device model from a particular vendor, and not even to other devices of the same type with a different revision and serial number.
Vendor and Product ID. Similarly, each line of products is assigned a product ID number. Both numbers are commonly written in hexadecimal, and a colon separates the vendor from the product ID. Alternatively, you can also specify Manufacturer and Product by name.
To list all the USB devices that are connected to your host machine with their respective vendor IDs and product IDs, use the following command:. On Linux, you can use the lsusb command. Serial Number. While vendor ID and product ID are quite specific to identify USB devices, if you have two identical devices of the same brand and product line, you will also need their serial numbers to filter them out correctly.
This setting specifies whether the device will be local only, remote only, such as over VRDP, or either. On a Windows host, you will need to unplug and reconnect a USB device to use it after creating a filter for it.
As an example, you could create a new USB filter and specify a vendor ID of d for Logitech, Inc, a manufacturer index of 1, and "not remote". Then any USB devices on the host system produced by Logitech, Inc with a manufacturer index of 1 will be visible to the guest system.
Several filters can select a single device. For example, a filter which selects all Logitech devices, and one which selects a particular webcam. You can deactivate filters without deleting them by deselecting the check box next to the filter name. Using the Touchscreen.
Battery Power or Direct Power. GPS Setup. Servicio de redes deshabilitado en forma predeterminada: Kali Linux contiene ganchos sysvinit los cuales deshabilitan los servicios de redes por defecto.
Terms used in this manual. Harmony App. Nov 13, Notice: If available, updates to this manual can be found on-line at www. Confidential proprietary information. All information contained in this document is subject to change without notice. Brunswick Bowling Products Corporation. Muskegon, MI CBA HR. The CBA is a powerful test instrument that measures, graphs, and compares performance of both primary and secondary rechargeable batteries and individual cells.
The CBA allows for the Android Studio 2. Installing prerequisites is beyond the scope of this manual, but if you are doing Android Unpack the project somewhere This issue is most prominent in the default launcher on Samsung devices — the TouchWiz All Rights Reserved. Designed by Templatic. Home Copyright Privacy Contact. Samsung Vbox Manual. Sponsored High Speed Downloads.
VirtualBox SDK Get the full lowdown on what your new Virgin TV V6 box can do, as well as a step-by-step guide on self-installing with QuickStart. Fancy a quick taste of what you can do with Virgin TV? If you're looking for the best place to start, this is the guide for you. With your Virgin TV box you can record three shows while you watch a fourth that you recorded earlier!
And that's not the only cool thing it can do. Looking for a specific show? Fancy finding something else starring Tom Hardy? We'll even share our WishList secrets with you…. Watch shows when you want them! Visit the On Demand section to find out how to use Catch Up TV, watch your favourite Netflix shows, rent the latest movie releases, explore exclusive Box Sets and learn all about our Apps. Got a problem?
0コメント